Our Product Range
With our vast industry experience, we offer our clients an exclusive range of goods lift. These goods lifts are extensively used in factories and storage facilities for the movement of goods between floors.
Two kinds of goods lifts that we offer
(i) Drum wound machine based or traction machine based Product Specification
(ii)Drum wound type without counter weight Product specification
- These lifts are available in various capacities ranging from 250 Kgs to 10 Tons.
- Goods and workers can be transported to any number of floors.
- The size of the lifts range from 3' x 2' to as large as 12' x 20'
- Standard height of the cabin is 6' 7½".
- The lift can open on the opposite side also (2 side open cabin).
- The movement of the lift is based on the coiling and uncoiling of a wire rope on a rotating drum.
- A unique feature of our drum design is the provision of two ropes coiling separately on a right hand thread groove and a left hand thread groove.
- This leads to lesser rope stress and longer life. These lifts are quicker to install and require lesser space.
- Traction type with counterweight
- This is achieved first through the use of 3 or more independent wire ropes stretched across the main traction sheave.
- There being no positive coupling between the lift and the machine leads to greater safety as a slip is permitted whenever there is an obstruction to the lift travel.
- No overload on the motor in case of lift overshooting at the top floor.
- Jerk free, smooth travel is possible by the usage of 2:1 roping. Though smoother, traction lifts travel at higher speeds than drum wound lifts using the same power.
Requirements at clients end
- Greater safety
- Jerk free, smooth travel
- Easy to operate
- Clarity height of doors is 2000mm
- Door Lintel Bottom should be at 2150 from FFL
- Doors are available in various designs like manual swing doors and telescopic doors
- All Sizes are inside finished dimensions in mm.
- All Hoist way walls are 230 mm thick Brick or 150 mm RCC walls
- At ground floor two side open doors are possible
- Entire civil structure for the lift shaft including plaster & painting of lift shaft inside.
- Three phase electric supply
- Scaffolding during lift erection
- Provision of sill support, machine support, lifting beam / hook, pit ladder, etc
- Grouting of our hold fasts, push button boxes, door frame members, etc.
- Machine room will be extended beyond the lift shaft so that machine is approachable from three sides for maintenance